Harmar Commercial Wheelchair Lift

CPL Commercial Vertical Platform Lift

Harmar's all new Commercial Vertical Platform Lifts are manufactured to meet or exceed the most current safety design standards and have been ETL Listed.

The CPL series was designed with precision and care to be an incredibly high-quality, code compliant access solution. With heights available from 4� to 14�, Harmar�s Highlander series is sure to meet your every need.

As with all Harmar lifts, the CPL is simpler to install, easy to operate and virtually maintenance free for use indoors and out.

Motor and electrical box both located at the top of the tower to eliminate water issues, and allow service without getting inside the tower
Ability to unbolt the base to get the lift through small openings
ETL Listed
Available in AC and DC models
Solid platform with non-skid surface for added safety
Solid 42� high guard panels
Weather-resistant design for indoor and outdoor use
Constant pressure, paddle switch controls with emergency stop button
Sensitive safety pan on bottom of platform stops the lift if it meets an obstruction
Stationary access ramp
Made in USA

Lifting height 4�-14� (53�, 77�, 101�, 125�, 149�, 171�)

Rated load 750lbs (340 kg)

Drive Belt driven ball screw / 90 VDC � hp motor with brake

Power supply 115 VAC � 20 Amp grounded circuit

Control circuit 24 VAC

Platform 36� x 54� (straight-through) with 42� high guard panels and grab rail Stationary ramp

Footprint 49� x 54�

Speed 10 fpm

Controls Constant pressure paddle switch with emergency stop

Manual lowering Device provided

Safety Design Standards ASME A18.1, Section 2 � Vertical Platform Lifts

Safety Design Standards CSA B44.1 / ASME 17.5 � Elevator and Escalator Electrical Equipment

Safety Features Safety pan, Final limit, Ball nut safety backup, Non-skid surface, Tower Braces (CPL800 and higher)

Warranty 1-Year parts

Shipping cost quoted by phone differs by part of the continental US in which you are installing.

Harmar�s all new Highlander Commercial Vertical Platform Lifts are manufactured to meet or exceed the most current safety design standards. The Highlander series was designed with precision and care to be an incredibly high quality, code compliant access solution. As with all Harmar lifts, the Highlander is simpler to install, easy to operate and virtually maintenance free for both indoor and outdoor use.

Description:

� Motor and electrical box both located at the top of the tower to eliminate high water issues, and allow service without getting inside the tower

� Ability to unbolt the base to get the lift through small openings

� Gates with elevator style ESI/EMI UL approved interlocks - eliminating any possible code issues

or interlock failures

� Plug in options to ease modifications in the field and assist with troubleshooting when required

� Battery powered option available.

Specifications

Lifting Height:

CPL400 53�/ CPL600 77� / CPL800 101� / CPL1000 125�

CPL1200 149� / CPL1400 171�

Rated Load:

750 lbs

Drive:

Belt driven ball screw / 90 VDC 1/2 hp motor with brake

Power Supply:

115 VAC � 15 Amp grounded circuit

Control Circuit

24 VAC

Platform:

36� x 54� (straight-through) with 42� high guard panels and grab rail / stationary ramp.

Footprint:

49� x 54�

Speed:

10 FPM

Controls:

Constant pressure paddle switch with emergency stop

(key switch optional)

Manual Lowering:

Device provided

Safety Features

Safety pan / Final limit

Ball nut safety backup

Non-skid surface

Tower braces (CPL800 and higher)

Warranty:

1-year parts

Fully ADA Code Compliant.

Commercial Platform lifts from 4' feet to 14'

Harmar Commercial Platform lift