To View A Unopened P-Lift
(Click Here.!)
Open Box P-Lift Series Wheelchair Lift
NOTE: Currently
Available, The P-Lift-50 Open Box Special Is A Brand New
Unit NEVER SOLD & NEVER USED It Has Simply Been Removed
From It's Original Packaging Displayed At A Trade Show And
Put Back In Its Original Packaging. The P-Lift Comes With
The Same Warranty As One That Has Not Been Taken Out Of
It's Original Packaging.
 |
The P-Lift
50 Americas Favorite Wheelchair Lift with a 850
pound capacity and the ability to lift up to 50
inches or in the event you need to go higher the
P-lift-70 will lift up to 70 Inches. The P-Lift-50 can give you back your freedom
providing access to the world as well as to areas
you were never able to gain access to before.
Now With A 90 Access Option
The P-Lift-50 Will Accommodate Each & Every
Orientation or Configuration Their Is.
The P-Lift-50 is one of
the quietest products available when installed and
adjusted to factory specifications.
By utilizing an screw design the P-Lift-50
wheelchair lift is inherently safe and you are not
exposed to the safety issues that chain driven lift
are exposed to.
Residential porch lifts
are a simple, affordable solution for creating easy
home access. Even a few steps can be a large barrier
to someone with limited mobility. A P-Lift-50
Residential Wheelchair Lift is designed for indoor
or outdoor use to provide a safer home environment
and a better quality of life.
|
| The
P-Lift-50 is equipped with a keyed ignition lockout
so individuals & children can not use the lift when
you do not want them using it.
The P-Lift-50 also has a
emergency stop button and a second keyed locking
panel for access to controls.
The P-Lift-50 is the
only platform lift with three target buttons for up
as well as three target buttons for down, this gives
a disabled user a far greater range and ability to
operate the lift themselves without the need of a
aid or 2nd individual to activate the lift. |
 |
| |
|
 |
Specifications
Constant Pressure Operation – for safety
Up to 850lb weight capacity
8 ft/min travel speed
Total Travel: 50in
Synchronous Geared Belt Drive with Brake
Screw Design
Durable Powder Coated Steel Construction
1 x 110 VAC Single Phase, 15A power required
Platform Size: 34in (Wide) x 54in (Long)
Note: The 90 Degree Access Option is
only available when ordering the P-Lift-50 & not
available when ordering the P-Lift-70. |
| |
|
|
Lifting Capacity |
850
lb |
|
Standard Lift Height |
50" |
|
Drive System |
Screw Drive |
|
Constant Pressure Platform Control |
Yes |
|
Emergency Stop Platform Control |
Included |
|
Platform Type |
Solid with Non-Skid Coating |
|
Straight Through
Platform Size |
34" x 54" |
|
Straight Through
Lift Footprint |
48"
x 54" |
|
90 Degree Access
Platform Size |
40" x 54" |
|
90 Degree Access
Lift Footprint |
54" x 54" |
|
Platform Configuration |
Straight-Thru Access |
|
Optional Platform Configurations |
Same Side Entry-Exit |
|
Grab Rail |
Included |
|
Maximum Stops |
2 |
|
Lift Speed (FPM) |
8 |
|
|
.
|
|
|
|
P-Lift-50 Wheelchair Lift
P-Lift-50
was designed and engineered for home use.
It's easy to operate easy to install and
virtually maintenance free.  Every
safety detail has been carefully designed
into the
P-Lift-50 including
a non-slip platform, constant pressure
switches, a low platform for easy
roll-on/roll-off, safety barrier and
railing, and rolled edges.
The P-Lift-50 is a sturdy enough to lift and
lower up to 850 pounds and will accommodate
electric wheelchairs and scooters. Running
on a Threaded Screw rather then a gear box
and chain, the P-Lift-50 will provide a
smooth and quiet up and down ride, requiring
little maintenance. All mechanics are fully
enclosed, yet easy to access through the
rear or front of the housing unit. The
P-Lift-50 completely weatherized and
attractively finished in extremely resilient
& durable Off White Color. |
|
|
Shipped fully assembled with the exception
of bolting on base, the P-Lift-50 install in
5 easy steps.
The P-Lift-50 Vertical Home Lift is the
economical and practical answer to stair
barriers. |
|
 |
-
The Vertical Home Lift P-Lift-50
-
Powered with a 110 volt AC current, by a
�
HP motor
-
The toggle control switches with a
tamperproof key lock switch are on a low
voltage system, for safe operation
-
Power drive system is all weather(-30 -
l20 degrees)
-
Heavy duty worm drive gear box with heavy
duty Worm Gear (No dangerous
lifting chain)
-
36 inch high side guard rail
-
Hand crank for manual operation
-
Adjustable limit switches
-
Automatic access ramp and roll stop
-
Non slip platform
-
Capacity - 850 pounds
-
Standard lifting height 50 inches.
|
|
The Vertical Home Lift P-Lift-50 Uses a
screw rather than a lifting chain. Lifting
chains can be very unreliable where as a
driving screw delivers a smooth reliable
transfer from one level to the next. |
 |
|
|
The
P-Lift-50 Vertical Home Lift
is one tough, safe, affordable lift.
|
|
The Image Below Will Change
Automatically Showing You All Available Configurations
|
|
P-Lift-50 Wheelchair Lift Open Box Special |
|
|
|
