 |
.
|
| |
|
|
|
|
90 Degree Access Wheelchair Lift
Click Here To View The Straight
Through Access P-Lift-50
 |
| |
The P-Lift
Series Wheelchair Lift with optional adjacent access
is Americas Favorite Wheelchair Lift with a 850
pound capacity and the ability to lift up to 50, 60
or 72 inches the P-Lift Series wheelchair lift can give you back your freedom
providing access to the world as well as to areas
you were never able to gain access to before.
The P-Lift
Series is now available in a 90 degree access
allowing a user to exit or enter from the right or
left and is one of the smoothest products available when installed and
adjusted to factory specifications.
By utilizing an screw design the P-Lift Series
wheelchair lift is inherently safe and you are not
exposed to the safety issues that chain driven lift
are.
|
| ... |
|
|
| Residential porch lifts
are a simple, affordable solution for creating easy
home access. Even a few steps can be a large barrier
to someone with limited mobility. A P-Lift Series
Residential Wheelchair Lift is designed for indoor
or outdoor use to provide a safer home environment
and a better quality of life. The
P-Lift Series Wheelchair Lift is equipped with a keyed ignition lockout
so individuals & children can not use the lift when
you do not want them using it.
The P-Lift Series also has a
emergency stop button and a second keyed locking
panel for access to controls.
The P-Lift
Series is the
only platform lift with three target buttons for up
as well as three target buttons for down, this gives
a disabled user a far greater range and ability to
operate the lift themselves without the need of a
aid or 2nd individual to activate the lift. |
|
|
Click On Any Photo Below To Enlarge |
|
| |
|
 |
|
The Straight Through P-Lift
Series
Can Be Configured Any Way A User Would Like. Meaning
The Tower Can Be Placed On Either Side And The Same
Goes For The Fully Automatic Folding Ramp & Barrier. |
 |
 |
 |
The 90 Degree Adjacent Access Option
Provides A Wider Platform. This Allows A Wheelchair
To Turn And Then Exit The Lift. Once Again The Tower
Is Reversible As Is The Folding Barrier Ramp Giving
The 90 Degree All The Flexibility Of The Straight
Through Version. |
 |
 |
The Flexibility For The
P-Lift
Series
Wheelchair Lift To Accommodate Any Configuration Or
Orientation Required Is The Envy Of Most All Other
Manufactures Or Competitors.
When You Combine The Flexibility Of Orientation,
With Any Configuration, Extreme Reliability, Diamond
Plate Deck, Weight Capacity Of 850 Lbs & Wireless
Remote Then You Have A Superior Product. |
 |
| |
|
Specifications
Constant Pressure Operation – for safety
Up to 850lb weight capacity
8 ft/min travel speed
Total Travel: 50 inch
Synchronous Geared Belt Drive with Brake
Screw Design
Durable Powder Coated Steel Construction
1 x 110 VAC Single Phase, 15A power required
Platform Size: 34in (Wide) x 54in (Long) |
Keyed Lock Out
Emergency Stop Button
Solid Diamond Plate Platform
Solid Hand Wall
Upper & Lower Limit Switch
Up & Down Button X 3
(for increased target
area)
Reversible Platform & Automatic Ramp
Reversible Tower
Adjacent Access Platform (Option) |
| |
|
|
Lifting Capacity |
850
lb |
|
Standard Lift Height |
50" |
|
Drive System |
Screw Drive |
|
Constant Pressure Platform Control |
Yes |
|
Emergency Stop Platform Control |
Included |
|
Platform Type |
Solid with Non-Skid Coating |
|
Straight Through Platform Size |
34" x 54" |
|
Straight Through
Lift Footprint |
48"
x 54" |
|
90 Degree Platform Size |
40" x 54" |
|
90 Degree
Lift Footprint |
54"
x 54" |
|
Platform Configuration |
Straight-Thru Access |
|
Optional Platform Configurations |
90 Degree Entry-Exit |
|
Grab Rail |
Included |
|
Maximum Stops |
2 |
|
Lift Speed (FPM) |
8 |
|
Tower Dimensions |
80 3/4" Tall X 32 1/4" Wide X 13"
Deep |
|
Complete Install
Video |
P-Lift-50 Assembly Guide.mp4 |
|
Electrical Schematic |
Electrical_Diagram |
|
View Straight Through
& 90 Degree Options |
Watch Slide Show Configuration |
|
|
.
|
|
|
Below Is The
Measurements On A Straight Through Access
|
P-Lift Series Wheelchair Lift
P-Lift Series
was designed and engineered for home use.
It's easy to operate easy to install with
the ability to reverse the tower an fold
down ramp to either side and
is virtually maintenance free.  Every
safety detail has been carefully designed
into the
P-Lift-50 including
a non-slip platform, constant pressure
switches, a low platform for easy
roll-on/roll-off, safety barrier and
railing, and rolled edges.
The P-Lift Series Wheelchair
Lift can easily lift and
lower up to 850 pounds and will accommodate
electric wheelchairs and scooters. Running
on a Threaded Screw rather then a gear box
and chain, the P-Lift Series will provide a
smooth and quiet up and down ride, requiring
little maintenance. All mechanics are fully
enclosed, yet easy to access through the
rear or front of the housing unit. The
P-Lift Series is completely weatherized and
attractively finished in extremely resilient
& durable Off White Color. |
|
|
Shipped fully assembled with the exception
of bolting on base, side wall & foldable
ramp the P-Lift Series residential
wheelchair lift install in
5 easy steps.
The P-Lift Series Vertical Home Lift is the
economical and practical answer to stair
barriers. |
|
 |
-
The Vertical Home Lift P-Lift
Series have a
one year warranty on parts against defects
-
Powered with a 110 volt
15amp AC current, by a
�
HP motor
-
The toggle control switches with a
tamperproof key lock switch are on a low
voltage system, for safe operation
-
Power drive system is all weather(-30 -
l20 degrees)
-
Heavy duty worm drive gear box with heavy
duty Worm Gear (No dangerous
lifting chain)
-
36 inch high side guard rail
-
Hand crank for manual operation
-
Adjustable limit switches
-
Automatic access ramp and roll stop
-
Non slip platform
-
Capacity - 850 pounds
-
Standard lifting height 50 inches.
|
|
The Vertical Home Lift P-Lift
Series Wheelchair Lift Uses a
stainless steel screw rather than a chain.
Click Here To Order. | g chain. Lifting
chains can be very unreliable where as a
driving screw delivers a smooth reliable
transfer from one level to the next safely everytime.
 |
 |
|
It is easy to see why the P-Lift Wheelchair
Lift is
Americas favorite Wheelchair Platform Lift
with a weight capacity of 850 lbs Keyed Lock
Out, Emergency Stop Button, Solid Diamond
Plate Platform, Solid Hand Wall, Upper &
Lower Limit Switch, Up & Down Button X 3
(for increased target area) and Reversible
Platform & Automatic Ramp. The P-Lift
Series was
designed to easily reverse the tower to any
side your application requires and is easy
to install. Also the P-Lift Series is used in
any environment indoors and out. Used in 40
below weather in Alaska and holds up to the
harsh environment of salt water from the
ocean in Florida the P-Lift Series is sure to
meet your needs. |
|
The P-Lift Series has a upper limit switch that
allows it to be set to stop perfectly at the
same height every time.
Also the P-Lift Series has many safety
redundancy systems well known in aviation or
air craft. Then engineers responsible for
the design of the P-Lift Series have applied the
same application to the P-Lift Series for
example the secondary upper limit arm that
would stop the lift from over riding at the
top in the event the 1st one failed. |
 |
 |
|
Once again the engineers applying a
secondary or redundancy to the lower limit
switch using a gate to make it 99.89%
effective. |
|
|
The
P-Lift Series Residential Home Wheelchair Lift
is one tough, safe, affordable lift.
|
|
The Image Below Will Change
Automatically Show You All Orientations &
Configurations.
|
|
P-Lift-50 Wheelchair Lift |
|
|
|
|
P-Lift-50
Adjacent Access Wheelchair Lift
|
|
|
