 |
.
|
| |
|
|
|
|
P-Lift Series Residential Wheelchair Lift
 |
The P-Lift
Series Residential Wheelchair Lift now Americas Favorite Wheelchair Lift with a 850
pound capacity and the ability to lift up to 50, 60
or 72
inches. The P-Lift Series wheelchair will give you back your freedom
providing access to the world as well as to areas
you were never able to gain access to before.
The
P-Lift-Series is one of
the smoothest products available when installed and
adjusted to factory specifications.
By utilizing an screw design the P-Lift-Series
wheelchair lift is inherently safe and you are not
exposed to the safety issues that chain driven lift
are exposed to.
Residential porch lifts
are a simple, affordable solution for creating easy
home access. Even a few steps can be a large barrier
to someone with limited mobility. A P-Lift-Series
Residential Wheelchair Lift is designed for indoor
or outdoor use to provide a safer home environment
and a better quality of life.
|
|
The
P-Lift-Series residential wheelchair lift. is equipped with a keyed ignition lockout
so individuals & children can not use the lift when
you do not want them using it.
The P-Lift-Series also has a
emergency stop button and a second keyed locking
panel for access to controls.
The
P-Lift-Series is the only residential wheelchair lift with three target buttons for up
as well as three target buttons for down, this gives
a disabled user a far greater range and ability to
operate the lift themselves without the need of a
aid or 2nd individual to activate the lift. |
|
| |
|
|
 |
 |
The 90 Degree
platform option (Shown To The Left) Allows users to
turn left or right to exit once they enter the lift.
The standard orientation is a straight through.
Meaning you enter from one side and go straight
through exiting the opposite side once lifted. |
|
The P-Lift-72 option allows users to travel a full
72" or 6' (six feet)
The 72 option is also reversible allowing the tower
to be placed on either side and as with the 50 or 60
model the 72 has a upper limit switch that once
adjusted will stop the lift perfectly where you need
it automatically every time. |
 |
| |
|
|
Click On Any Photo Below To Enlarge |
|
| |
|
 |
|
The Straight Through P-Lift-Series Can Be
Configured Any Way A User Would Like. Meaning The
Tower Can Be Placed On Either Side And The Same Goes
For The Fully Automatic Folding Ramp & Barrier. |
 |
 |
 |
The 90 Degree Access Option Provides
A Wider Platform. This Allows A Wheelchair To Turn
And Then Exit The Lift. Once Again The Tower Is
Reversible As Is The Folding Barrier Ramp Giving The
90 Degree All The Flexibility Of The Straight
Through Version.
Note: The 90 Degree Access Option is
only available when ordering the P-Lift-Series & not
available when ordering the P-Lift-72. |
 |
 |
|
The Flexibility For The
P-Lift-Series To Accommodate Any Configuration Or
Orientation Required Is The Envy Of Most All Other
Manufactures Or Competitors.
When You Combine The Flexibility Of Orientation,
With Any Configuration, Extreme Reliability, Diamond
Plate Deck, Weight Capacity Of 850 Lbs & Wireless
Remote Then It Is Easy To See The P-Lift-Series Is A Superior Product. |
 |
| |
|
|
Specifications
Constant Pressure Operation – for safety
Up to 850lb weight capacity
8 ft/min travel speed
Total Travel: 50 inch
Synchronous Geared Belt Drive with Brake
Screw Design
Durable Powder Coated Steel Construction
1 x 110 VAC Single Phase, 15A power required
Platform Size: 34in (Wide) x 54in (Long) |
| ........ |
Keyed Lock Out
Emergency Stop Button
Solid Diamond Plate Platform
Solid Hand Wall
Upper & Lower Limit Switch
Up & Down Button X 3
(for increased target
area)
Reversible Platform & Automatic Ramp |
| |
|
|
| |
|
|
Lifting Capacity |
850
lb |
|
Standard Lift Height |
50" |
|
Drive System |
Screw Drive |
|
Constant Pressure Control |
Yes |
|
Emergency Stop Platform Control |
Included |
|
Platform Type |
Solid with Non-Skid Coating |
|
Straight Through Platform Size |
34" x 54" |
|
Straight Through
Lift Footprint |
48"
x 54" |
|
90 Degree Platform Size |
40" x 54" |
|
90 Degree
Lift Footprint |
54"
x 54" |
|
Platform Configuration |
Straight-Thru Access |
|
Optional Platform Configurations |
90 Degree Entry-Exit |
|
Grab Rail |
Included |
|
Maximum Stops |
2 |
|
Lift Speed (FPM) |
8 |
|
Tower Dimensions |
80 3/4" Tall X 32 1/4" Wide X 13"
Deep |
|
Complete Install
Video |
P-Lift-Series Assembly Guide.mp4 |
|
Electrical Schematic |
Electrical_Diagram |
|
Straight Through & 90
Degree |
Watch Slide Show Configuration |
|
Manual |
P-Lift-50_V1.0.pdf |
|
|
.
|
|
|
|
P-Lift-Series Wheelchair Lift
The P-Lift-Series
was designed and engineered for residential home use.
It's easy to operate easy to install with
the ability to reverse the tower an fold
down ramp to either side and
is virtually maintenance free.  Every
safety detail has been carefully designed
into the
P-Lift-Series including
a non-slip platform, constant pressure
switches, a low platform for easy
roll-on/roll-off, safety barrier and
railing, and rolled edges.
The P-Lift-Series can easily lift and
lower up to 850 pounds and will accommodate
electric wheelchairs and scooters. Running
on a Threaded Screw rather then a gear box
and chain, the P-Lift-Series will provide a
smooth and quiet up and down ride, requiring
little maintenance. All mechanics are fully
enclosed, yet easy to access through the
rear or front of the housing unit. The
P-Lift-Series completely weatherized and
attractively finished in extremely resilient
& durable Off White Color. |
|
|
Shipped fully assembled with the exception
of bolting on base, legs & hand wall, the P-Lift-Series install in
5 easy steps.
The P-Lift-Series Vertical Home Lift is the
economical and practical answer to stair
barriers. |
|
 |
-
The Vertical Home Lift
P-Lift-Series have a
one year warranty on parts against defects
-
Powered with a 110 volt 15
amp AC current, by a
�
HP motor
-
The toggle control switches with a
tamperproof key lock switch are on a low
voltage system, for safe operation
-
Power drive system is all weather(-30 -
l20 degrees)
-
Heavy duty worm drive gear box with heavy
duty Worm Gear (No dangerous
lifting chain)
-
36 inch high side guard rail
-
Hand crank for manual operation
-
Adjustable limit switches
-
Automatic access ramp and roll stop
-
Non slip platform
-
Capacity - 850 pounds
-
Standard lifting height 50 inches.
|
|
The Vertical Home Lift
P-Lift-Series Uses a
screw rather than a lifting chain. Lifting
chains can be very unreliable where as a
driving screw delivers a smooth reliable
transfer from one level to the next. |
 |
 |
|
It is easy to see why the P-Lift-Series is
Americas favorite Wheelchair Platform Lift
with a weight capacity of 850 lbs Keyed Lock
Out, Emergency Stop Button, Solid Diamond
Plate Platform, Solid Hand Wall, Upper &
Lower Limit Switch, Up & Down Button X 3
(for increased target area) and Reversible
Platform & Automatic Ramp. The
P-Lift-Series was
designed to easily reverse the tower to any
side your application requires and is easy
to install. Also the P-Lift-Series is used in
any environment indoors and out. Used in 40
below weather in Alaska and holds up to the
harsh environment of salt water from the
ocean in Florida the P-Lift-Series is sure to
meet your needs. |
|
The P-Lift-Series has a upper limit switch that
allows it to be set to stop perfectly at the
same height every time.
Also the P-Lift-Series has many safety
redundancy systems well known in aviation or
air craft. Then engineers responsible for
the design of the P-Lift-Series have applied the
same application to the P-Lift-Series for
example the secondary upper limit arm that
would stop the lift from over riding at the
top in the event the 1st one failed. |
 |
 |
|
Once again the engineers applying a
secondary or redundancy to the lower limit
switch using a gate to make it 99.89%
effective. |
|
|
The
P-Lift-Series Vertical Home Lift
is one tough, safe, affordable lift.
|
|
The Image Below Will Change
Automatically & Show You All Orientations &
Configurations.
|
|
P-Lift-Series Wheelchair Lift |
|
|
|
|
P-Lift-Series
Platform Lift
|
|
|
